The other day a scissor sharpener sent me a pair of shears that were bent all out of whack. Unfortunately the bend was in the ride area of the blade. The ride area is the area of the blade just behind the early entry of the cutting-edge. This meant that to fix these shears I had to bend the blade over the screw hole, not an easy task and not something I recommend doing unless you absolutely have to. In this case though we had no choice. The sharpener's customer wanted the shear fixed if possible because both she and the sharpener couldn't find an exact replacement and she really liked this shear. That's where I came in and I'll show you what I had to do to fix this shear in the video below:
For anyone new to scissor sharpening, here is a picture below of what I was talking about in the video when I mentioned that the sharpener had forgotten to flip the Ookami® clamp over causing the cutting edge of the blade to bite into the wheel.
This next picture below shows the proper orientation of the blade to the wheel. Always make sure your clamp is in the honing position one polishing to share on the Ookami Gold® System.
As always, if you have any questions about sharpening or the sharpening business in general I can be reached at 864-381-8697 or email@example.com. Also, if you're thinking about buying sharpening equipment, give me a call. I know where all the best deals are.